Sovol SV08 Enclosure with Honeycomb storage wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Remixed the Enclosure from 3DprintMyLife and add the Honeycomb storage wall from RostaP
- Ocena
- 4,75 / 5
- Polubienia
- 141
- Pobrania
- 671
- Wydruki
- 6
- Wyświetlenia
- 4175
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Check out my other models :)
Update 10: Add a Honeycomb Top with 50mm Raiser
Update 9: Add 2 Tops for neo2478. Must be glued together. a normal one and a lite version for less filament needed.
UPDATE 8: Add a Honeycomb decor doorframe and a closed functional one, please use the hinges and Handles from the original model. You will find it here:
https://www.printables.com/de/model/959792-sovol-sv08-enclousure
UPDATE 7: Add a Top Version without stabilistation ribs, be aware this version is not for putting heavy things on it!
Also add 2 Versions (tight and easy fit) of Dowels to connect the top parts.
Print 1 of each to check wich version is better for you. you will need after that a total of 20 Dowels to connect the parts.
UPDATE 6: All files are now on v2 working at the door remix.
UPDATE 5: Add Backpanel
UPDATE 4: Add a v3 Flat Top version for less support needed.
Update 3: Left & Right Side modded to v2 for better fit. iam workin on the other Parts for v2, too but not finished jet.
UPDATE 2: Add a Honeycomb Top
UPDATE 1: I Print it with 2 walls and 15% Gyroid infill, but iam not finisched to print it at the moment.
I Printed it in PLA
15% Gyroid infill
2 Walls (you can use more if you want)
I want to use the nice Enclosure with the legendary Honeycomb storage wall (there are so many addons).
Glue the plates together.
Use M3x8 screws to attach the sidepanel to the printer.
If you find any problems please tell me :-)