1 / 4
DIY Arcade Cabinet - TPU feet for 23 mm woodbeam
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the a leg for a DIY arcade. The base uses 23 mm wood beams as shown in the image. The leg is designed for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is the a leg for a DIY arcade. The base uses 23 mm wood beams as shown in the image. The leg is designed for increasing the stability of the cabinet.
Use 2 screws.
Print Settings
Printer:
Prusa i3
Rafts:
No
No
Resolution:
0.2
50
Filament: Any TPU
Notes:
Use less infill if you want a softer leg
Category: Video Games