1 / 9
Instant Coffee Dispenser PiP (Print in Place) No Support Needed! — zdjęcie 1
1 / 9

Instant Coffee Dispenser PiP (Print in Place) No Support Needed!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Instant Coffee Dispenser that dispenses 1 tea-spoon of coffee per-pull&push

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
503
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NO SUPPORT NEEDED
I printed it with 
PLA at 0.2mm layer height
10% infill
3 wall loops

Around 2 - 2.5 hours print

All files are already print ready and leveled for the bed, no need to rotate.

I used rough-grain instant coffee and i don't know if it works with fine-grain instant coffee, results may vary with fine-grain.

To use it: 
You assemble the parts like in the pictures
put the cover on, pull out the flat part of the chute from the outside, let the grain's fall into the chute, then hover over your desired mug, push the flat part into the dispenser and ta-da, 1 tea-spoon of coffee. Just repeat that as often as you need.

If you found any issues please let me know!

Tagi