Cannabis Leaf - Business Card Embosser Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For cannabis advocates: Leaf Pattern Rollers for the Business card embosser! (Only rollers, no casing)
- Ocena
- 0 / 5
- Polubienia
- 94
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The broad dimensions of the roller blank are:
- 30mm diameter
- 60mm long
- 12.2mm square drive, 10mm deep.
The roller has a 1mm fillet on the edges and 1mm chamfer on the drive.
Using the circumference (PI x Diameter), I set out the repeating pattern in a sketch.
Inspired by the Monstera Leaf pattern, this has three rows spaced 20mm apart. The three rows have the leaf shape rotated 45 degrees in alternating directions. The lead is 15mm tall.
The Onshape “wrap” tool makes it really easy to “emboss” or “engrave” the rollers from a sketch but don't forget one side needs to be a mirror image to allow the shapes to come together correctly. I've matched the emboss/engrave dimension at 1.2mm.