Enclosure for Flipped Raspberry Pi 2 W mounted to Stock EINSY MK3S/+ Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Raspberry Pi 2 W can be installed flipped / reversed so that the CPU and WiFi modules face outwards for cooling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an enclosure for the Raspberry Pi Zero 1/2 W when mounted in reverse / flipped on the EINSY enclosure so that the CPU and WLAN can face away from the board for better cooling.
No need to print another custom EINSY enclosure. Just snip the existing enclosure as shown in the photo.
I printed this in PETG, 0.4mm nozzle, 0.15mm, no supports other than for one bridge.
- The enclosure has three push-fit tabs that click into the EINSY enclosure as well as a hole for the Prusa-standard M3 nut and bolt to align with the existing hole in the EINSY enclosure.
- The Micro USB port for power is intentionally blocked.
- The bottom ribbon cable port for a camera is left exposed for easy access.
- There is also a bracket for the Raspberry Pi with a push-fit connector for additional stability to lift the RPi 3mm up from the EINSY enclosure if your breakaway connectors require it. The RPi uses 4 x M2.5 mounting holes, but the bracket is designed for M2 nuts and bolts as I didn't have M2.5 parts at the time.
STEP files are provided instead of STL for easier editing.
GCODE provided for MK3S+ with supports, support blockers, and helper disks. Can be printed in sequential order.