Better gauges for Proxxon 150E lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These gauges for Proxxon 150E allow to move the axes with 1/100mm increments
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These gauges for Proxxon 150E allow to move the axes with 1/100mm increments instead of the default 5/100mm.
The gauges come with a set of adapters that can be easily installed to compensate for the bigger size of the gauges.
Note that the bigger gauges size means that some axes movement can be restricted, in case if you need to make a deeper cut you might need to switch to the default gauges.
In case if you don't get a proper fit with the models with your printer feel free to slightly scale the models up or down to get the fit you like.
No support needed.
Print the gauges with minimal layer height (I used 0.08mm) to get the best text. Adapters can be printed with any layer height.
Support the author:
The model is free to use and published under CC-BY license, however if you want to support the model author you can do it here: BuyMeACoffee link