Cone for the Harbor Freight / Amazon wheel balancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for the Harbor Freight wheel balancer. Also known as a static or bubble balancer. I got this one from…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is for the Harbor Freight wheel balancer. Also known as a static or bubble balancer. I got this one from Amazon. Works well for car or truck tires after simple modifications but for trailer tires the springs that compress are too strong. The trailer tire is too light. The cone raises the tire higher so the springs do not have to be fully compressed and keeps wheel centered. I'm using PLA glow in the dark because I was too lazy to change it. PETG or ABS should work too. I used 5 layers for the wall. I wanted strength. Infill could be 30 up to 75. I used 60 for the final but you can use less.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
No
Supports:
No
.2
Infill:
60
Notes:
Walls are 5 layers thick. Infill
Category: Automotive