Electrochemical Cell Cap with Bubble Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Electrochemical cell cap designed for a electrochemical cell of diameter ~ 50 mm.Original design:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
Improved Electrochemical cell cap designed for a electrochemical cell of diameter ~ 50 mm.
Original design: https://www.thingiverse.com/thing:4338198
The improved cell cap holds up to 8 electrodes at an angle. The holes on the sides of the cap are made for electrodes of diameter ~ 7 mm. A sufficiently small reference electrode can also fit inside one of these.
All holes now have an enlargement so that a screen printed electrode can fit inside connected to a crocodile clip.
The central hole has been converted to a bubble guard, so that bubbles do not disrupt any crocodile clip connections.
Finally, if this work is used in a published scientific study, please credit the use of it accordingly.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.15
Infill:
5%
Category: Engineering