Linear ACT-34B Keychain Transmitter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got a fob when I moved into the building. Keyring broke almost immediately. Finally got around to designing and…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Got a fob when I moved into the building. Keyring broke almost immediately. Finally got around to designing and printing a new case for it. Not sure how long this ring will last. Will make improvements if it breaks again.
Original case looks like this:
https://linear-solutions.com/product/4-channel-block-coded-key-ring-transmitter/
Check out the 1 button version here: https://www.thingiverse.com/thing:5236335
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.4
Filament: Creality PETG Yellow
Notes:
I print with a volcano 0.8mm nozzle. Should come out fine with a 0.4mm nozzle.
Drill out the bolt holes with a 9/64 drill bit and bolt the two halves together with m3 socket head cap screws and nuts.
Category: Replacement Parts