Peristaltic pump compatible with lego
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 563
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego technic. I've been using it with 6mm silicone aquarium tubing to pump small amounts of citric acid into a baking soda solution at regular intervals to produce C02 in an aquarium.
There are versions with different squish ratios (parameter from the parametric peristaltic): 0.3 squishes the tubing less and is easier to turn 0.4 squishes the tubing more and is harder to turn. Without a gear reduction, this one barely works, try 0.3 first.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Yes
Supports:
Yes
0.2
Infill:
50
Notes:
In cura, I set for minimal supports. You only need them under the little pin hole depressions on the bottom of the model.
Category: Mechanical Toys