Replacement Feet for Step Ladder (DWG/STEP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made Replacement Feet for a Step Ladder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Some people throw away step ladders because they have broken feet, others gladly take those broken step ladders and print new feet for them. =)
I used enough walls to make it solid and used normal (snug) supports for the 3 braces in the middle. Just paint the area and you're golden. Remove the supports in one go with needle nose pliers.
I made these slightly thicker and tighter than the original, hoping that they will last longer that way.
Printed in PETG for a little bit of flexibility, although I'm wondering if TPU might be an option since we're only going to be using it indoors.