DragonFly Windmill [Lesser goofy-looking Demon Windmill]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a miniature windmill that rotates with the wind current. This can be hanged, planted on gardens, rooftops.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 878
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Introduction:
Hi!! This is my second model, which I have made by myself😁. This is a demonic goofy-looking dragonfly that rotates its wing with air current. It can be planted on gardens, rooftop or inside home. Dragonflies are known to repel mosquito and other bugs that's why I choose this to make primarily for outdoor use.
Parts:
There are generally 5 parts, which are as follows.
1. The Head
2. The Rear
3. Wing holder
4. Wings (4*1)
5. Tower/Stand (Optional)
Instructions:
Print the parts like The Head [X:0, Y:-55,Z:0] and The Rear [X:55.52, Y:-48.60,Z:0] in an angle for better quality with supports; However, first try as it is, if any issue occurs, then try the angles.
Input the wing holder inside the head then attach the head to the rear. Adjust the wing after attaching them to the wing holder. Also, I have provided a version of slightly lighter wings. No form of screws are needed for this build.
This model better works when the wings are in a upward position; The sideways positions require more wind flow.