Lux Schraubzwinge / Soft clamps for a Lux screw clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ersatz für den die Backen der Schraubzwinge. Replacement for the soft clamps of the screw clamp from Lux.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Dies ist ein Ersatzteil für die Backen der Schraubzwinge 200 x 50 von Lux (Teilenr. 549 107), die mit den Jahren spröde werden und brechen. Dies ist keine 1:1-Kopie, sondern stellt nur die Funktion wieder her und ist etwas robuster gehalten als das Original.
Dieses Modell funktioniert schon in PLA, Kunststoffe mit etwas mehr Weichmacher sind besser, etwa Prusa ABS. Für Prusa MK4 gesliced, drucken mit 0,2 mm auf 0,4 mm Düse, mit Stützen.
Update: Bei einer zweiten Schraubzwinge, gleiche Teilenummer, passten die Teile nicht. Während der runde Untersetzer zu weit war, war der obere “Schuh” viel zu eng. Ich habe mich entschlossen, nicht beide Teile in ein neues Modell zu adaptieren - sondern in zwei neue. Ein generell engeres und ein generell weiteres. Einfach ausprobieren, welches der drei am besten passt…
This is a spare part/replacement for the soft parts of the screw clamp 200 x 50 from Lux (parts no. 549 107), because the originals get brittle over the years and break. This is not a 1:1 copy, but rather restores the functionality and is more sturdy than the original.
This model works with PLA, but plastics with more softener (plasticizer) content work better, like Prusa ABS. Sliced for Prusa MK4, print with .2 mm on .4 mm nozzle with supports.
Update: On a 2nd screw clamp, identical parts no, the two clamps did not fit. While the round part was too wide, the upper “shoe” was too narrow, by far. I decided not two adapt the two in one new model - but in two. One is generally narrower and another that is generally wider. Try which of the three fits your need best…