1 / 3
Feed removal tool for vintage Sheaffer Balance fountain pen — zdjęcie 1
1 / 3

Feed removal tool for vintage Sheaffer Balance fountain pen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool to safely remove the feed on a vintage Sheaffer Balance fountain pen with a feed extension.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a tool for safely removing the feed from a Sheaffer Balance fountain pen, it fits around the feed extension, and should be narrow enough that it won't scratch the inside of the section (especially if you do some post processing).

Cheaper alternative to a tubular brass tool, might be safer too (non marring). Designed for the slender size, but should probably work with standard and oversize too.

 

Use a feed knockout block and a small hammer if you can, otherwise you can use the inside edge of a thick cardboard roll of sufficient height, like the inside of a masking tape roll or something similar.

 

Printed in PLA+ with 100% infill, 0.4mm nozzle and 0.2mm layer height.

Print the head of it facing the buildplate.

Tagi