1 / 6
BTT HDMI 5" V1.2 case for SV08 with tabs — zdjęcie 1
1 / 6

BTT HDMI 5" V1.2 case for SV08 with tabs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adds tabs to Nadir's case to mount the display at the original spot without drilling. Bonus adapter for tophat.

Ocena
0 / 5
Polubienia
13
Pobrania
152
Wydruki
0
Wyświetlenia
770
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I simply combined the model of the tabs with Nadir's great case and baked them into a new stl.

I then made an adapter to fit this tabbed case to the top hat which has a different tab spacing than the lower mount. I also tried to add tabs with matching spacing but this makes it impossible to get the cables out at the back of a V1.2 version. I have not yet tried it on the top hat.

 

Print tabs facing down with supports enabled. There is a lot of support but it will not be visible when case is mounted. 

Thorouhly clean out support off the adapter You might risk breaking the tabs, when remaining supports are in the slots! It's tedious, but necessary!

OpenSCAD for the tabs and adapter included.

 

Feedback welcome!

 

Have fun!

Tagi