Dice Dispensing Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having trouble gathering piles of 5 dice for fast rolling your board games and want a printed solution? Look no further!
- Ocena
- 4,6 / 5
- Polubienia
- 87
- Pobrania
- 1730
- Wydruki
- 6
- Wyświetlenia
- 5077
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Having trouble gathering piles of 5 dice for fast rolling your board games and want a printed solution? Look no further!
I wanted a way of gathering my wargaming dice in pools of 5 for fast rolling my dice during wargaming sessions. The dice depicted are 16mm wide, but there is also a file for 12mm dice. This stacks (and dispenses, duh) dice in groups of 5 and holds around 45-50 dice in its magazine.
I have printed the models standing upright without supports. I have tried both PLA and PETG, and prefer the lower sound of the PETG when dice knocks around in there.
Note; your dice will jam inside the magazine. When this happens, lightly shake the whole tower from side to side. The dice in the tray should stay put and the dice in the magazine should (most of the time) fall down by themselves.