1 / 12
A Sheep thats a spare toilet roll holder — zdjęcie 1
1 / 12

A Sheep thats a spare toilet roll holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A spare toilet roll holder thats designed to look like a sheep. More interchangeable heads in the future.

Ocena
5 / 5
Polubienia
231
Pobrania
525
Wydruki
6
Wyświetlenia
3879
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Share Alike

This was a fun little project of mine after getting inspiration from others on Etsy and Amazon.

I wanted to get more experience in Fusion360 and 3D printing at the same time.

This comes in several parts, all link to each other.

The head links with the pin to the backplate The Legs (you need to clone) link to the body And the Eyes (print in White) connect to the head

The fun part about this is that if you print the eyes in white you get to draw your own style and look, crazy or sane.

n,b this is intended for a spare toilet paper (loo roll) holder, its not intended for every day use!

[editors notes] Whilst this works with my toilet rolls of choice this might not work with yours; please check your measurements before printing. You might need to scale it accordingly. the current design was intended to fit an inner tube of 43-45mm with some tolerances. I will see if I can work a mechanical design to fit different sizes.

Happy printing

 

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 V3 KE

**Rafts:**

Yes

Supports: 

Yes

**Resolution:**

0.16

Infill: 

15

**Filament:** Creality PLA Black/White 
 

Notes: 

I turned on fuzzy skin for my prints and blocked out the parts where I did not want the pattern (on the connecting pieces).

There is no need to support the inside of the head, this is fine without however the ears will need support and so will the eyes.

The body suggests it needs support but I found this to be OK without.

 

[edit 2024-08-28]
I have created a backplate v2, this is indented to print flat at 0.16 and didn't need any supports on my KE, it was a good fit for the pin and seemed to be flexible with the tube I have here. Because of the thin layer it should be flexible to fit in smaller tubes.

 

Category: Bathroom

Tagi