Beverage Can Dispenser-330ml
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable beverage can dispenser for standard Euro cans (330 ml). Versions for five or six cans.
- Ocena
- 4,5 / 5
- Polubienia
- 393
- Pobrania
- 952
- Wydruki
- 2
- Wyświetlenia
- 8695
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!)
------------------------------------------------------------------------------------------------------------
Nested and keyed Beverage Can Dispenser for standard Euro cans (330ml). There are versions that hold five (5) or six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together once in place. I have mine stacked four-high in my refrigerator, but can also be used two-high on shorter shelves.
I included “Full” versions for both sizes so anyone with a printer capable can print them in a single piece.
The assembled 5-can Dispenser is 5.11inches wide x 13.16 inches deep x 3.56 inches high. (The cover only adds 0.03 inches to the overall height because it nests.)
The assembled 6-can Dispenser is 5.11 inches wide x 15.75 inches deep x 3.56 inches high. (The cover only adds 0.03 inches to the overall height because it nests.)
I also included an optional cover for all versions so that items can be stacked on the Dispenser to maximize space efficiency. (see photos). I also think it makes the final product look cleaner in a kitchen. The covers are available in “slot” and “full” versions. The slot provides easier access to the cans in the top Dispenser (Thanks to @Justnice980 for the slot idea!)
Printed in PLA. No supports required except for the bottom of the cross-strut in the front half. (Although @Justnice980 printed the parts using OrcaSlicers thick bridges option…sorry, I don't know the PrusaSlicer equivalent settings.)
Please post Likes and Makes if you like the design. Thanks!
Other Versions Available:
12 oz USA https://www.printables.com/model/914365-beverage-can-dispenser-12-oz
500 ml https://www.printables.com/model/975010-beverage-can-dispenser-500ml
12 oz Slim https://www.printables.com/model/1194514-beverage-can-dispenser-12-oz-slim-cans
12 oz Mini https://www.printables.com/model/1210213-beverage-can-dispenser-75-oz-mini-cans