Twilight Imperium 4 - Player Color Storage Box and Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had printed the original boxes and liked them but on my first one I had an issue with the thin walls on the lid and…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1066
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I had printed the original boxes and liked them but on my first one I had an issue with the thin walls on the lid and lip.
I went and thickened the walls so the total thickness is 4mm. This makes the thin parts 2mm.
Since I was redrawing this I also made the box a bit bigger and taller as well. An assembled War Sun will sit inside on it's side.
I also made the card area fit the FFG Yellow sleeves pretty exactly. Since that's what I'm using.
Print instructions
Category: Games Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 5% Gyroid
Filament: MCM Inland PLA Black