Christmas tree with fluffy leaves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A christmas tree with (usually) hated overhangs
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
Christmas tree with fluffy leaves
This christmas tree uses not connected overhangs to generate the leaves/neadles of a christmas tree.
Printinstructions:
Filament I used:
Filament for tree: Prusament Premium PLA Mystic Green 1kg
Filament for the star: Silver PLA filament 1kg (the one you get shipped when buying a Prusa Printer)
For the first set of leaves you should watch your printer just to be sure everyhing is fine.
Afterwards you can cut some unnecessary leaves and add the star on top.
For decoration I used some goldspray and small fairy lights.
Printsettings:
Tree:
nozzle 0.6 mm and 0.3 mm layer for thicker leaves
nozzle 0.4 mm and 0.2 mm layer for normal leaves
15% Infill
Star:
nozzle 0.4 mm or 0.6 mm but preferable 0.4 mm
with ironing for the top surface
15% Infill
Left: 0.6 mm nozzle with goldspray and fairy lights
Right: 0.4 mm nozzle with no decoration