1 / 1
Compact mount for Vantrue E2 camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A more low profile mount for the Vanture E2 camera. This was mostly needed to fit behind the mirror in the Mazda Miata ND3 without obstructing too much of the windshield.
Note: this requires taking apart of the original mount (it is possible to buy replacement mount separately from the camera, if the things go south). The ribbon cable in the mount is rather short and this part is as long as possible without breaking it - it might take some caution to re-connect it to the board (it is prone to ripping).
Uses an M4 screw for the pivot