Wallpaper roll dispenser thing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make it much easier to put up wallpaper!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
When you get your wallpaper it's usually packed in a box that's almost the exact width of the rolls. Print two of these things to turn that box into a very practical dispenser!
Just put the things over the sides of the box, and a roll of wallpaper on the things.
Apply the glue to the wall. Then simply position the box close to the wall, aligned with where you want the next sheet of wallpaper to sit. Pull the end of the wallpaper directly from the roll, and on to the wall. The rest of the roll sits firmly in the box without any hassle!
It hardy carries any load or so, so I guess you can print it in any material with pretty much any settings. I did mine in PLA+ with 2 walls.
No supports are needed.