1 / 3
Delta-P fan duct V2-R2 for Slice Mosquito Hotend — zdjęcie 1
1 / 3

Delta-P fan duct V2-R2 for Slice Mosquito Hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is custom derivation of Delta-P Duct & Cover for Slice Mosquito hotend.

Ocena
0 / 5
Polubienia
3
Pobrania
36
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0
Works best with https://www.printables.com/model/408663-remix-body-update-prusa-i3-mk3s-mosquito-hotend-up 
=== DISCLAIMER: Description is taken over from the original creator ===
"This is version 2 (V2) of the Delta-P fan duct for MK3. It has several advantages compared to the stock fan shroud:
  • Prints easily with no supports
  • Better part cooling
  • Refined flow path
  • CFD optimized
  • Even cooling front to back and left to right
  • Improved visibility of nozzle
Print guidelines:
  • 0.20mm layer height
  • 4 perimeters
  • No supports
  • PETG, ABS, ASA, or other high temp material



Installation Instructions:

Installation complete! It is recommended to do a PID tune of your hotend after installation."

Tagi