Oculus-base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for your Oculus headset and the hand controllers
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
I was done with storing the wobbly Oculus headset, that's how i came up with this design.
I thought it even could be worth sharing :)
The hand controllers locks in the hedset by the angle they are placed in the base.
The charging cable has two lock in gaps to keep it on the right place and side of the unit.
If you don't like the tight fit of the hand controllers it safe to scale up the print out 1 or 2%, it will still work.
I use the slightly elliptical shape of the controllers to keep them tight…to be honest i didn't see that they wasn't evenly round at first attempt but this turned out better than making the fitting elliptical…if you ask me ;)
Approx. 225 grams.
The print you see in the pics was printed with 0.08 mm layer height in PLA Silk (not the best choice).
I hope You like it!