1 / 2
PIP Swivel Hanger 2.0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned to be a bit bulkier and have more room for various sizes of hooks and hangers.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
This is re-design to my other PIP swivel mount. This design is print in place and still requires only the screws to mount it. The mount base is sized for #8 screws.
The files are designed in the proper print orientation and don't require support.
While this design does freely spin, it doesn't spin as well as the other design. However, this does not require the extra hardware and bearing.
PETG recommended
3 perimeters recommended
or higher extrusion width for perimeters to get better layer adhesion.