Gridfinity Kobalt SAE Socket Holder 2x5x3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holder for Kobalt 3/8" drive SAE sockets
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 202
- Wydruki
- 2
- Wyświetlenia
- 1252
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity holder and organizer for Kobalt 3/8" drive SAE sockets. Slots for 7/8"-5/16", both regular and deep sockets. Organizer fits in a 2x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the organizer and only uses around 0.59 grams of filament if you want to print it in a second color like I did. Organizer includes slots for magnets in the base in case you want them.
The blue and white model in the photos was printed with Polymaker PolyMax PLA.
This model is part of a set with the Metric socket and ratchet holders found here:
Metric - https://www.printables.com/model/974184-gridfinity-kobalt-metric-socket-holder-3x5x3
Ratchet - https://www.printables.com/model/974194-gridfinity-kobalt-38-drive-ratchet-holder-1x5x3
This model is part of my Toolbox Organization series on TikTok. A collection of the designs featured in that series can be found here: https://www.printables.com/@thesquirrely_2218847/collections/1640776
Print Settings (using PLA):
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 10% (honeycomb)
Walls: 3
No supports or brim necessary.