1 / 2
Galileo 2 Extruder Cable Chain Arm for Siboor Trident June — zdjęcie 1
1 / 2

Galileo 2 Extruder Cable Chain Arm for Siboor Trident June

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lets you use the included cable chain with the Galileo 2 Extruder.

Ocena
5 / 5
Polubienia
32
Pobrania
192
Wydruki
1
Wyświetlenia
1005
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Use the F623ZZ bearings from the original siboor cable chain swivel, an m3 heat set and a M3x16 BHCS. Placing the heatset can be a bit tricky, be careful not to damage the swivel.

Print orientation as in the .stl, Voron standard settings. Use supports on the swivel for the cable chain connector. The arm doesn't need supports.

Tagi