First layer Test for Creality K1/Ender3 complete bed 0.2mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First Layer Test for the complete printbed of the Creality K1 or Ender3 at 0.2mm layerhight
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 260
- Wydruki
- 0
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Simple and usable First Layer Test for Creality K1 and Ender 3 and all other Printers with a 22,5x22,5cm printbed. I designed this on cause the most ignored the room where the printer wiped. Now you can test the entire bed.
It will show you how good your printer works and where you need to recalibrate or turn some screws.
If your print does not turn out perfectly you can reffer for example here:
https://www.reddit.com/r/FixMyPrint/comments/rsjrh8/diagnosing_first_layer_problems/
to find the reason of your Problems.
Its a verry good position to start with the search for a solution.
I can not give you a general solution here cause every printer is different and every
problem may be different.