1 / 4
Auto-locking 180° Rope Tensioner (print-in-place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upgrade to the automatic tensioner. Uses a 180* turn for better leverage and a 2:1 mechanical advantage.
- Ocena
- 4,3 / 5
- Polubienia
- 1395
- Pobrania
- 3727
- Wydruki
- 19
- Wyświetlenia
- 14 902
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 19) (Komentarze: 31)Remiksy (0)Kolekcje (1870)Powiązane
An upgrade on the automatic tensioner. When I put up a tarp, I like to set my “static” line to a tree and then pull in a direction away from that static line (in other words: toward the tarp), so I made mine have a 180° degree turn back to where the rope came from.
This design also gives you the benefit of physics! It provides a pulley-like 2:1 mechanical advantage when tensioning because of the 180 degree turn.
If you like it, give it a thumbs up, comment, and “make” :)
Specs:
- The model supports up to a ¼" rope/paracord.
- Print-in-place.
- Labelled option showing loading and tension direction
- There is a “windowed” model that allows you to see/poke/fish your rope through, and a “windowless” model that is a 180 curve all the way.
Printing Recommendations:
- I recommend organic supports, “from build plate only”, to ensure the gear track prints smoothly, but otherwise may print well without supports if your printer can do that nicely.
- Strong filament recommended, depending on your usage as it will be under load.