QUICK-CLIP (GEN 3) Husky Flashlight Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece mount for a Husky flashlight.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Mount for a Husky flashlight. Utilizes the belt clip that comes with the flashlight. The belt clip slides fully into the upper mount. The bottom mount is just to restrict movement of the flashlight. If you're limited on space, you can use just the upper mount. A plumber left this flashlight in my house so I don't know what model exactly it is, but if it has a belt clip and looks the same it will probably fit. If you don't have the belt clip this will NOT work for you.
Printed out of ASA on a 0.4 nozzle, 0.2 layer height, 0.4 line width. 2-3 walls and at least 3 top layers recommended. I enabled supports touching the build plate for the top mount. You might be able to get away with no supports if your bridging is good. You may have to flip the models along the top plane so the clip side is touching the build plate, similar to how the other QUICKCLIP accessories are printed.