1 / 2
Helical Turbine Wind-spinner - Print in Place - NO ASSEMBLY
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind-spinner for garden or deck. 100mm X 160mm
- Ocena
- 5 / 5
- Polubienia
- 141
- Pobrania
- 483
- Wydruki
- 2
- Wyświetlenia
- 3176
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (174)Powiązane
V2 - Smaller outer blade connecting supports with deeper tilt help with spin.
Simple print, No supports, Zero assembly, Unique wind-spinner. Made provisions for Zip ties and or screws for mounting. Model just balances on its spinning axis. This model does take a bit more than a small breeze to get going but once it starts it really GOES! Better suited for gardens that get a decent breeze. Printed in PET-G HF.
3 walls - 5mm brim minimum.