1 / 2
Shark Steam Mop Wall Mount V2 — zdjęcie 1
1 / 2

Shark Steam Mop Wall Mount V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds the Shark S7001 Steam Mop Off the ground and on the wall

Ocena
4,5 / 5
Polubienia
5
Pobrania
46
Wydruki
2
Wyświetlenia
286
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Designed for the Shark S7001, but should work with any broom, mop, etc with a shaft less than 35mm and a larger upper part. 

Made large enough screw holes for 2 #6 drywall screws

 

Seems strong enough in PLA, but PETG may be a better choice.

Print Orientation: Screw Side down

Supports: Yes

Layer Height: 0.2mm (0.3mm works fine too)

Infill: Adaptive Cubic @ 25%

Tagi