Flashforge Adv 5M Pro tool holder block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a desktop tool holder for the Flashforge 5M Pro
- Ocena
- 4,75 / 5
- Polubienia
- 61
- Pobrania
- 679
- Wydruki
- 5
- Wyświetlenia
- 2490
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About the design
I created this desktop tool holder for my Flashforge 5M Pro. This tool holder fits partially under the bottom of the printer body to keep it locked in place. The tools that I need to include are very generalized. Just the tools that I need during regular printing.
- pliers
- flush side cutters
- touch screen stylus pen
- Gorilla glue CA bottle
- 2 glue sticks
- USB storage
Printing Instructions
- 0.4mm nozzle
- 4-6 walls
- 0.24 layer height
- PLA
- 12% infill
Print with TREE (Auto) supports. These supports are only required for the front opening where your USB memory stick is stored.
It is a simple design created in Alibre Atom3D CAD. I hope that it works for you too.
**Update: added revision 2.5 which enlarges the USB memory stick storage opening in the front side of the tool holder. Included both an STL and STEP version of the files.
***Update 3: added revision 3.0 - a narrow design without the base plate. Also increased the CA glue space to allow for larger bottles.