1 / 1
FasTrak flex holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your FasTrak Flex without worrying about leaving a sticky residue from the default velcro solution.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A simple holder for a FasTrak flex. This is designed to fit a FasTrak flex that measures approximately 100mm wide x 40mm tall x 8mm thick.
Two variations are provided:
- the FasTrak_holder_suction_cup_ver.stl is designed to work with 3 suctions cups that have a stem diameter of 6mm.
- the FasTrak_holder_template.stl serves a FasTrak flex holder template for others to base modifications on. An example mod that I've provided is the FasTrak_holder_visor_clip_mod.stl which allows users to clip the FasTrak holder to a sun visor that is between 21-30mm thick. It is not guaranteed to work for visors thicker than 30mm, but feel to give it a try. It definitely won't work with visors thinner than 20mm as is. Simply glue/affix the clip to the FasTrak holder template part.