1 / 5
balancing bottle holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Balancing bottle holder is design for folding chair with a cylindrical metal frame.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (44)Powiązane
I was put for a challenge by a friend who didn't have integrated bottle holder in his folding outdoor chair. So i created this balancing bottle holder for him and decided to share it with you guys.
Main function is to balance bottle verticaly preventing it from spilling over when chair is bent back or forward. Created one hook mount with vise and one with zip tie for mount variaton. Can be mounted on surfaces not exceeding 22mm diameter.
Slicing/printig tips:
- ziptie_hook.stl and vise_hook_v2.stl was printed without brim but you should add some for stability or not :) It sticks good on a satin powder-coated sheet.
- printed all parts with petg for better structural strenght.
- all parts printed with 30% infill.
- hook, screw and screwcap parts printed with 4 perimeters.
- no supports needed.