Mounts for SKR1.4 / RPi 4B / Stepdown Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts for SKR1.4, RPi 4B, and Stepdown Module: Each mount requires 4 M3 inserts. Double-sided foam tape is also needed
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These are mounts for the SKR1.4, Raspberry Pi 4B, and step-down converter.
I made it for my Klipper hardware setup. They are designed as a simple solution for those who cannot or do not want to drill holes or make other modifications for installation.
Each mount requires four M3 inserts. You'll also need some pieces of double-sided foam tape or any adhesive material that can stick to your desired surface. Simply apply the tape to each corner of the mount and stick it onto the surface where you want it installed.
* Please note: Not every step-down module is compatible with this design.