Multi-Color Stargate GDO (Garage Door Opener)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-color (but easy to print) ornament based on Stargate SG1 GDO (Garage Door Opener)
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Multi-color (but easy to print) ornament based on Stargate SG1 GDO (Garage Door Opener)
This is a layered-multi-color-print (LMCP) - simply put - your just going to have change some filament a few times!
I printed mine entirely with PLA (Inland) and it went flawless (Prusa)
How to print:
I Printed mine with Inland Black PLA, Inland Silk Silver, Inland Transparent Green, Inland Bone White, and Inland Gray. The provided pre-sliced file has all the pauses built in for changing filament - I have also included the .3mf file if you wish to slice your own.
(see the included photo screen shot of my print time)
Start the print with black
First color change, switch to Silver
Second color change, switch to Green
Third color change, switch to Silver
Fourth color change, switch to Bone White
Fifth color change, switch to Silver
Sixth color change, switch to Gray
Seventh color change, switch to Black
I have provided holes on each side to allow you to slide an un-bent paper clip into the ornament, fix it in place on the bottom with some super glue or clear tape
Now hang it on the Tree!
Please enjoy and leave comments! (and makes!!!)