Kings Dominion Dominator logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"The floor is dropping and you are not stopping. Enjoy your ride on the Dominator." Dominator is a B&M floorless…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
"The floor is dropping and you are not stopping. Enjoy your ride on the Dominator."
Dominator is a B&M floorless coaster located at Kings Dominion in Doswell Va. It opened originally as Batman: Knight Flight then was moved to Kings Dominion in 2008. The ride consists of a height of 157ft (48m), a track length of 4,210ft (1,280m), and a top speed of 65mph (105km/h). Twisting through 5 inversions this ride is a fun smooth roller coaster that always pleases. So with that, of course, I made the ride entry sign. This is intended for a palette, mmu, or similar printer. It will not work on regular 3d printers. It can be scaled up to fit any print bed. So I hope you enjoyed your ride. Ride-On.
Photo used for reference / on the page: https://rollercoaster.fandom.com/wiki/Dominator
Print Settings
Printer Brand:
Robo 3D
Printer:
C2 R2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
[
3D Solutech PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=3D+Solutech++PLA&tag=thingiverse09-20) Blue, Grey, Yellow, Black How I Designed This
I used Fusion 360 with prusaslicer and p2pp. Printed on a Robo c2 and Mosaic Manufacturing Palette 2.
Category: Signs & Logos