1 / 6
Center Cap Mount Rivian R1T and R1S 21" Wheels — zdjęcie 1
1 / 6

Center Cap Mount Rivian R1T and R1S 21" Wheels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no cost.

We’re here to empower the Rivian owner community by making DIY customization simple, affordable, and accessible — backed by over 5,000 downloads on our Printables page and our new low‑cost, free‑shipping Creator Kits available on our website.

And if you’re considering a Rivian R1S or R1T, you can receive up to $500 in Rivian Gear while supporting our mission of open‑source enhancements by using our Rivian Referral Rewards code: ROBERT1265188. You enter this code when putting your deposit down on your Rivian. Details are available here.

+++

This is a 3D printed snap connector that allows for installation of the center cap from the Rivian 21" rim aero cover directly onto the 21" rim itself. 

The center cap snap-fits into the rim and can be removed easily. Unsnap them from the aero cover, snap them into this and insert into the open bit in the middle of the rim itself. Once installed, these are removable from the rim and reinstallable into the aero cover. 

Please note: Repeated install and removal weakens the material and may result in losing a center cap. When installed into the rim, they are in there quite tight and make take effort or planning to get out.

Print in ASA or ABS. I don't recommend PETG as it may deform in the operating temperatures that these are exposed to.

 

Warning: I've been running the ASA printed version of this for months now without issue, and other folks have been as well, but like everything, YMMV. You may lose a center cap if not printed correctly. Use at your own risk.