1 / 1
Tighter fitting 3DO enclosure cam v2 extrusion mount for 2020 V-slot extrusions — zdjęcie 1

Tighter fitting 3DO enclosure cam v2 extrusion mount for 2020 V-slot extrusions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alternative mounting plate with a tighter fit for 2020 V-slot extrusions

Ocena
0 / 5
Polubienia
3
Pobrania
50
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The default mount didn't fit at all on my 2020 V-slot extrusions, so I made this alternative mounting solution.

I really recommend printing this with the longest side standing upright/vertically, so that the tabs can snap into the 2020 extrusion without breaking. In that case, supports (only on build plate)/brim might be needed depending on your printer's tolerances.

Sorry for the terrible photo, I didn't know how to best take a picture of such a small change!