1 / 1
FlyFishRC 40mm Stubby DJI O3 Antenna Mount for 22mm Standoff Spacing — zdjęcie 1

FlyFishRC 40mm Stubby DJI O3 Antenna Mount for 22mm Standoff Spacing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to fit the FlyFishRC 40mm Stubby DJI O3 Antenna on any FPV Frame with 22mm Standoff Spacing

Ocena
0 / 5
Polubienia
0
Pobrania
41
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple mount for the DJI O3 Stubby Antenna made by FlyFishRC. I got tired of breaking the stock antenna, but with the stubby antenna and this more protective mount I haven't broken one since.

The antenna can be found here:

https://www.flyfish-rc.com/collections/dual-band/products/flyfishrc-5-8ghz-2-4ghz-dual-band-ufl-antenna-for-dji-o3?variant=42246268977332

It was originally designed to fit on a Speedybee Master 5 HD above a mount I also made for an ELRS Antenna (Linked Below), but it will fit on pretty much any frame with 22mm Standoff Spacing in the rear. 

It is designed to print using TPU with no support. It has survived countless crashes with no damage to the antenna. I printed in 95A TPU with 20% Gyroid Infill and 3 Perimeters. 

Tagi