RoboForce Glyos Tank Base with Treads

This is an optional bottom half that can be used for the RoboForce figures I've been re-designing and printing at ⅔ scale of the original toys. This is a reference to the Glyos line that released updated versions of the RoboForce figures some years ago.

The parts are oriented for best printing. They shouldn't require any supports or brim. I printed this on my XL to have black and grey in a single piece, but you can easily print in a single color and just paint any areas desired.

The Tread needs to be printed in a flexible filament of some kind. I used a standard TPU, but you can experiment with different flexible materials to find one you like. 

Assembly:

Print one each of the Left Side, Center, and Right Side pieces. The Left and Right are different, and need to be assembled with the Center in the right orientation to fit the tabs at the top and the pegs for all five tank wheels. 

After printing the Center, push a piece of 1.75mm filament through the five holes to become one side of the axles of each wheel. It should stick out of both sides in roughly equal distances. You can test fit the wheels to make sure they don't have any gap between the Center and Wheel pieces. 

Attach five wheels on one side of the Center piece, then flex and fit the Tread around all five, so the wheels remain in place. I suggest test-fitting the Side piece and pushing the tread back and forth until you feel the pegs on the top of all five wheels pop into the holes in the Side. Once you know it fits, pull apart and add glue, then re-assemble. Wait for the glue to dry, then assemble the other side in the same way. 

The tread won't roll by itself, but with a little pressure you should be able to roll it along your tabletop, and add whichever of the RoboForce top halves you want. 

RoboForce Figures (so far):

• SOTA
• Hun-Dred
• Coptor
• Enemy
• Wrecker
• Vulgar
• Maxx 25
• Cruel

Bases:

• Tank Base
• Rocket Base
• Magnet Base
• Spider Base