Hanger for 500ml Cardioplegia Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger suitable for 500ml glass cardioplegia bottles (or for any glass bottle with diameter of ~78mm. PRINT IN TPU
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was asked to design and print some hangers for 500ml cardioplegia bottles for perfusionists in my department as they couldn't get hold of the commercially available polypropylene ones. This is designed to be printed in TPU for flexibility (PLA/PETG/ASA is too rigid and breaks).
The main part is 1mm thick, with ribs of 1.5mm to reinforce at the highest strain parts.
How I printed it:
1, TPU (I used Bambulab TPU 95A HF)
2, 0.24mm layers with concentric top and bottom layer
If you want different diameters for top (large hole) or bottom, or different length between them to fit different bottles let me know.