Gillette "Fatboy" Adjustable Safety Razor Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple razor stand, designed with the Gillette "Fatboy" Adjustable in mind, though the design works with others.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design was made to suit a Gillette “Fatboy” adjustable safety razor, but works with many others, so long as the base of their handle is less than 13.5mm in diameter. (Holder is 14mm diameter)
Tested with a Fatboy, Slim Adjustable and flare tip Super Speed razor.
Example I printed was in PET-G, which I sanded smooth, but this would be an ideal project for ABS or ASA, which could be smoothed after printing using acetone.
Print settings aren't very important, no supports required, so print it whatever way works for you.