L4M4R PNP Canopy for Walksnail 1S V3 VTX board and Radiomaster RP1 RX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple frame compatible canopy for Walksnail 1s VTX and Radiomaster RX RP1 antenna
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Universal Walksnail VTX and RX PNP canopy for multiple frames
Use ABS other strong material to print, but works fine even with PLA or PETG (it is your own risk and responsibility). I'm using the same Canopy having VTX and RX for several frames saving money not buying multiple VTX / RX. Look at the photos for how to tips.
Make sure there is silicone dumper between metal case and the canopy.
Notes
- remix of original STL for TBS Source Podracer 5 inch frame Canopy adapted for other, smaller frames and Walksnail VTX 1s Litecompatibility for TBS Podracer / BetaFPV Twig 3-5", X-Knight frames
- Walksnail 1S VTX version 3 board “hanging” mount
- Walksnail 1S VTX version 3 antenna mount, no zip tie required
- Radiomaster RX internal bay and rear antenna mount
- requires filament m2 inserts to mount canopy to carbon frame
- integrated supports for no-support printing with 0.2mm or variable layer profiles
- 20mm raised legs to handle second (VTX) 25x25 board beyond the FC/ESC AIO board
If you like it - please click ‘Like’, download files or/and buymeacoffee.com/L3M4R to support me and my designs ;-).
Versions
- 2024-08-17 v3.0
- 2024-08-18 v3.01 stronger rear reinforcers
- 2024-08-27 v3.02 stronger tin, extra supports
