Hazet Box 854, newer style

I made this box to replace the original Hazet boxes as they keep breaking at the latch and hinges. This is a toolset that is used by every technician in my field and most have broken with normal use. I made this box able to withstand heavy abuse and every day wear and tear. Both pieces of foam from the original box will transfer and fit directly in place in this one. I made the front face of each half flat and a little thicker to allow for any lettering you want to add such as a personal name or company name. I use PETG-CF for all parts of this. You can use whatever you like, but I would not recommend PLA as it can be brittle and will also deform in the heat of a car sitting in the sun. I print at 0.12mm layer height with 100% infill and it comes out incredibly strong.

You will need to cut 5 sections of rod: x1- 146mm/5 ¾" and x4- 32mm/1 ¼". Be sure to smooth the ends of the rods so they slide through the holes easier.

Assembly is straight forward. Print one each of the bottom and lid and print 2 latches. You will need 1/8" steel rod and a long 1/8"/3.2mm drill bit and a way to cut the rod. This is what I bought https://a.co/d/8sUQjaZ. 3mm rod and drill bit will work as well. After all prints are done you will need to drill through all the existing holes to create a smooth bore for the rod to slide through. 

I use a 3D pen to fill in the ends of the holes to keep the rods secure, but glue or something similar will work as well.