40/50/65th Birthday Coaster (MMU version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drink Coaster for 40/50/65 Birthday
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Could be used as a drink Coaster but the intent was for it for it to be put on the back of my Brother's Race Car (who was turning 50)
Have now include a "40" and "65" version
Print instructions
The 3mf file should load up in Prusa_slicer all the parts at the right height for the MMU.
You may want to put different filament profiles against each extruder (or revert back to the standard Prusa profiles)
Extruder 1 = White
Extruder 2 = Black
Extruder 3 = Red
I guess you could explode the parts and print the different colours on a non MMU machine and then glue them back together.
Suggest that PETG rather than PLA be used if hot cups are to be placed on it.
Have included gcode files but my PLA settings may not suit all so (strongly) suggest you reslice with your filament settings.
It also works well if you invert it on the build plate, it reduces the waste block and imparts the texture of the build plate to the visible surface. (the 3mf for the 65 version is oriented this way)