K1 Max Triple Z Door Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily removable door plug for the K1 Max to suit triple Z mods.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This door plug for the K1 max seals up the hole in the door for the screen, and is easily removeable when not using high temperature filaments. It sits in place when the door opens.
Based on Derrick Darrell's original design, with modified geometry to fit the K1 Max and importantly also has a recess in the back to sit around the front right stepper motor when using Derrick's triple z mod (as found here: https://makerworld.com/en/models/408110)
Recommended Print Settings
Material: Whatever you like. I used CF-ASA.
Nozzle: 0.4
Layer height: 0.1-0.2
Walls count: 3
Top/bottom layers: 4
Infill: 20% Cross-Hatch
Recommended Orientation & Support Settings
This model is pre-orientated, and will require supports. I also recommend the use of the brim to increase bed contact.
Support type: Normal
Support style: Grid
Support top distance: 0.2mm
Tags