Lab Apparatus Clamp (Closed Connector)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device allows for the connection of standard laboratory stands to metal rods by clamping them with two screws…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This device allows for the connection of standard laboratory stands to metal rods by clamping them with two screws from either end of the central block. The use of this connector will allow the attachment of rods to stands at a right angle or parallel replacing the use of standard boss head clamps which can only hold at a right angle off the central shaft.
Print instructions
Category: Biology Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3mm
Infill: 40%
Filament: Sunlu PLA red and white
Notes:
When printing the threaded clamping screws a brim is very helpful. Ensure that the central block is placed so that one of the large faces is on the bed of the printer to increase structural integrity.