1 / 1
XL Nextruder Main Plate - better filament guide — zdjęcie 1

XL Nextruder Main Plate - better filament guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Flex-friendly plate, to make both filament insertion and filament sensor cleaning easier.

Ocena
5 / 5
Polubienia
37
Pobrania
313
Wydruki
6
Wyświetlenia
1306
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This remixes this otherwise great main plate remix, to make filament insertion easier.

My filament would get “stuck” past the filament sensor, making insertions harder (and requiring me to remove the PFTE tube at the nextruder, pull a bit of filament out, make sure it doesn't get stuck and goes far enough to get “gripped” the the teeth, put the PFTE tube back in).

It adds a bigger “funnel” inlet.

 

This also enlarges the filament sensor cleaning hole, to make the compressed air method easier.

 

Material: 

I printed mine in PETG initially, then in PCCF (when I got the enclosure). The XL enclosure instructions actually don’t seem to require that piece to be in a higher temp resistant material (they don’t spend spares for it), so I think PETG is fine in any case.